• SCMI SUPERSET - 5 HEAD 1996 AND NEWER --- MUST HAVE 1 13/16" SPINDLES; CONNECTED 230 VOLTS

• Louver Groover machines - any make
• UHLING "HP3000 & 4000" Case Clamps

• IMA "HKA" , BRANDT or MIDWEST AUTOMATION "CM-1000" contour edgebanders, late models preferred
• 2003 or newer HOMAG Double-sided squaring edgebander up to 3mm banding
• 2003 or newer HOMAG double-sided Soft-former

• Lumber Presure treating plant that can handle Rail Road Ties
• large wood fired / solid fuel Boiler

• Hot Press - 54" x 110" min. platen cap., oil heated preferred, 5-12 daylight openings w/ 3-4" opening and 600-1,000 tons of pressure.
• 4' x 12' or 4' x 16' Capacity Hot Press, one daylight opening required, customer is in CANADA but will have one shipped from anywhere.

• "SALEM" Type 6' Vertical Bandmill with Return and Edger. Must be in 1st class condition

• KOCH SPRINT CNC Drill and Dowel 100 - 2000 mm. Late model!
• Multiple Head Hinge Boring Machine

• Late model front load & rear load Horizontal Beam Saws (All Brands)
• Late model Pod & Rail (P to P) Machining Centers (All Brands)
• 5' x10'-12' Panel stock 180 or 360 degree bundle turners
• Late model Angular Panel Saws (All Brands)
• 20' - 40' container of gravity roller conveyor (depending on price). Can be a combination of 400 mm (16") - 500 mm (20") - 600 mm (24") wide or all one width. Please - no rusty junk!

• Late Model 24" Single head planer. \fs17 in S. Florida region. \fs17 US or European mfg. only .
• Hydraulic Sheet Metal Notcher: Suitable for 14 ga. stainless steel. 8" - 10" notch cap.
• ROTO-DIE 12ft Hydraulic Sheet Metal Brake.
• 12' Hydraulic Sheet Metal Shear, 16 ga. cap.
• CRANES, 150 - 200 TON, Track-type preferred. Less than 20 yr. old

• POLAR or similar 44" - 48" Paper/Veneer Cutter, in Northeast US or Canada.
• INTERMAC, BRETON, DENVER, CNC Stone/Granite/Marble Working Center, late model, 5' x10'.
• BRETON, GMM, DENVER, or similar Bridge Saws for Granit/Marble/Stone.
• FARO 3D Arm Digitizer, or similar.

• Membrane Press , any brand Burkle, Wemhoner, Shaw, Ital, etc.
• Flat Laminators 5' (1600mm), any brand, Burkle, Monco, Harlan, Hymmen, etc.
• Feed Through Press 5' (1600mm) x 10' (3100mm), any brand Burkle, Wemhoner, Sennerskov, etc.

EX-FACTORY, INC.
1805 Sardis Road North, Charlotte, NC 28270
Phone: (704) 841-2001 -- Fax: (704) 841-1200
Customer Service: Leilani Silo